通达信精准线指标公式(求高手编写一个周k线macd在0轴以上金叉的通达信条件选股公式？)
1. 求高手编写一个周k线macd在0轴以上金叉的通达信条件选股公式？
DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;
CROSS(DIF,DEA) AND DEA>0 AND DIF>0;
在选股周期中选周线。
2. 求高手编写一个周k线macd在0轴以上金叉的通达信条件选股公式？
DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;
CROSS(DIF,DEA) AND DEA>0 AND DIF>0;
在选股周期中选周线。
3. 通达信在任意指定位置画垂直线的公式，怎么编写？
A:=CURRBARSCOUNT=10; STICKLINE(A,C,H+1,0,-1); 画线位置根据需要修改，但是要在满足条件的前提下。
4. 通达信6个绝密公式源码？
TD1:=C;
TD2:=IF(TD1=1 AND REF(TD1,-1)=1 AND REF(TD1,-2)=1 AND REF(TD1,-3)=1 AND
REF(TD1,-4)=1 AND REF(TD1,-5)=1 AND REF(TD1,-6)=1 AND REF(TD1,-7)=1 AND
REF(TD1,-8)=1, 1,0);
TD3:=IF(REF(C,-9)>=REF(C,-13),1,0);
TD4:=IF(TD2=1 AND TD3=1,1,0);
TD5:=IF(H>=REF(LLV(L,5),-3),1,0);
D8:=IF(REF(TD4,1)=1 AND TD5=1,1,0);
5. 怎样通达信公式指标如何测试准确率？
首先登陆上咱们的通达信股票软件，然后点击左上角的功能——公式系统——公式管理器——点击或者新建需要测试的公式，设置检测条件，就可以开始检测了。
6. 通达信在任意指定位置画垂直线的公式，怎么编写？
A:=CURRBARSCOUNT=10; STICKLINE(A,C,H+1,0,-1); 画线位置根据需要修改，但是要在满足条件的前提下。
7. 通达信6个绝密公式源码？
TD1:=C;
TD2:=IF(TD1=1 AND REF(TD1,-1)=1 AND REF(TD1,-2)=1 AND REF(TD1,-3)=1 AND
REF(TD1,-4)=1 AND REF(TD1,-5)=1 AND REF(TD1,-6)=1 AND REF(TD1,-7)=1 AND
REF(TD1,-8)=1, 1,0);
TD3:=IF(REF(C,-9)>=REF(C,-13),1,0);
TD4:=IF(TD2=1 AND TD3=1,1,0);
TD5:=IF(H>=REF(LLV(L,5),-3),1,0);
D8:=IF(REF(TD4,1)=1 AND TD5=1,1,0);
8. 怎样通达信公式指标如何测试准确率？
首先登陆上咱们的通达信股票软件，然后点击左上角的功能——公式系统——公式管理器——点击或者新建需要测试的公式，设置检测条件，就可以开始检测了。
9. obv默认指标公式？
OBV 是成交量指标 用成交量真实变化来推测股价运行的变化 它并不是超买超卖指标 所以设置0-100就忽略了他的根本意义 它的取值是根据成交量来的 你把几万的数值改成区间内变化的数值 这个指标将会毫无用处
Q2：哪种股票软件可以设置2条OBV平均线参数？
通达信 OBV 指标的公式是：VA:=IF(CLOSE>REF(CLOSE,1),VOL,-VOL);OBV:SUM(IF(CLOSE=REF(CLOSE,1),0,VA),0);MAOBV:MA(OBV,M);你只要再加一个参数 M1 2 100 50 然后加入下式就可以了MAOBV2:MA(OBV,M1);以后只要在“调整指标参数”中调整到你认为适合的数值。由于 OBV 是通达信系统的指标，在下一次启动时会恢复原来的设置，因此你要另外设置一个指标来使用上述公式。
10. 通达信在任意指定位置画垂直线的公式，怎么编写？
A:=CURRBARSCOUNT=10; STICKLINE(A,C,H+1,0,-1); 画线位置根据需要修改，但是要在满足条件的前提下。
11. 通达信在任意指定位置画垂直线的公式，怎么编写？
A:=CURRBARSCOUNT=10; STICKLINE(A,C,H+1,0,-1); 画线位置根据需要修改，但是要在满足条件的前提下。
12. 通达信某均线穿某均线倍量阳指标源代码？
以下为通达信某均线穿某均线倍量阳指标的源代码：
```
输入：M1:SHORT,M2:SHORT,M3:SHORT,M4:SHORT,N1:SHORT,N2:SHORT,N3:SHORT,N4:SHORT,PERIOD:INTEGER;
VAR:MA1:DOUBLE,MA2:DOUBLE,MA3:DOUBLE,MA4:DOUBLE,LC:DOUBLE,TR:DOUBLE;
VAR:UPP:DOUBLE,LOW:DOUBLE,B1:DOUBLE,B2:DOUBLE,B3:DOUBLE,B4:DOUBLE,B5:DOUBLE,B6:DOUBLE,B7:DOUBLE,B8:DOUBLE,B9:DOUBLE,B10:DOUBLE,B11:DOUBLE,B12:DOUBLE,B13:DOUBLE,B14:DOUBLE,B15:DOUBLE,B16:DOUBLE,B17:DOUBLE,B18:DOUBLE,B19:DOUBLE,B20:DOUBLE,B21:DOUBLE,B22:DOUBLE,B23:DOUBLE,B24:DOUBLE,B25:DOUBLE,B26:DOUBLE,B27:DOUBLE,B28:DOUBLE,B29:DOUBLE,B30:DOUBLE,B31:DOUBLE,B32:DOUBLE,B33:DOUBLE,B34:DOUBLE,B35:DOUBLE,B36:DOUBLE,B37:DOUBLE,B38:DOUBLE,B39:DOUBLE,B40:DOUBLE,B41:DOUBLE,B42:DOUBLE,B43:DOUBLE,B44:DOUBLE,B45:DOUBLE,B46:DOUBLE,B47:DOUBLE,B48:DOUBLE;
VAR:BUY:INTEGER;
IF BARSCOUNT>PERIOD THEN BEGIN
MA1=MA(CLOSE,M1);
MA2=MA(CLOSE,M2);
MA3=MA(CLOSE,M3);
MA4=MA(CLOSE,M4);
UPP=MA1+N1*STDEV(CLOSE,M1);
LOW=MA1-N2*STDEV(CLOSE,M1);
B1=CLOSE<MA1 AND CROSS(MA2,MA1);
B2=CLOSE<MA1 AND MA1<=MA2 AND MA2<MA3 AND MA3<MA4;
B3=CLOSE<MA1 AND MA4<MA3 AND MA3<MA2 AND MA2<MA1;
B4=CLOSE<=MA2 AND MA2<MA1 AND MA1<=UPP AND
(CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4);
B5=CLOSE<=MA2 AND MA2<MA1 AND UPP<CLOSE;
B6=CLOSE>MA1 AND MA2>=MA1 AND BARSSINCE(B1)=1;
B7=CLOSE>MA1 AND MA2<MA1 AND BARSSINCE(B2)=1;
B8=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND BARSSINCE(B3)=1;
B9=CLOSE>MA1 AND MA1<=UPP AND MA2<MA1 AND (CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4) AND BARSSINCE(B4)=1;
B10=CLOSE>MA1 AND UPP<=MA1 AND BARSSINCE(B5)=1;
LC = Ref(CLOSE,-1);
TR = Max(Max(HIGH-LOW,ABS(HIGH-LC)),ABS(LC-LOW));
B11=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B6)>=PERIOD;
B12=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B7)>=PERIOD;
B13=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND
CLOSE-MA1>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B8)>=PERIOD;
IF B11 OR B12 OR B13 THEN
BEGIN
B14 = MA(CLOSE,N1) > MA(CLOSE,N2);
B15 = MA(CLOSE,N2) > MA(CLOSE,N3);
B16 = MA(CLOSE,N3) > MA(CLOSE,N4);
B17 = MA(CLOSE,N4) > MA(CLOSE,PERIOD);
B18 = VOLUME > MA(VOLUME,PERIOD)*N4;
B19 = CLOSE > MA(CLOSE,PERIOD);
B20 = IFF(B14 AND B15 AND B16 AND B17 AND B18 AND B19,1,0);
B21 = SUM(B20,PERIOD-1) = PERIOD-1;
B22 = REF(B21,1);
IF B21 THEN
BEGIN
IF B22 THEN BUY = 1;
END
ELSE BUY = 0;
END;
END;
BUY不为0时表示出现该指标的买入信号。
13. 通达信6个绝密公式源码？
TD1:=C;
TD2:=IF(TD1=1 AND REF(TD1,-1)=1 AND REF(TD1,-2)=1 AND REF(TD1,-3)=1 AND
REF(TD1,-4)=1 AND REF(TD1,-5)=1 AND REF(TD1,-6)=1 AND REF(TD1,-7)=1 AND
REF(TD1,-8)=1, 1,0);
TD3:=IF(REF(C,-9)>=REF(C,-13),1,0);
TD4:=IF(TD2=1 AND TD3=1,1,0);
TD5:=IF(H>=REF(LLV(L,5),-3),1,0);
D8:=IF(REF(TD4,1)=1 AND TD5=1,1,0);
14. obv默认指标公式？
OBV 是成交量指标 用成交量真实变化来推测股价运行的变化 它并不是超买超卖指标 所以设置0-100就忽略了他的根本意义 它的取值是根据成交量来的 你把几万的数值改成区间内变化的数值 这个指标将会毫无用处
Q2：哪种股票软件可以设置2条OBV平均线参数？
通达信 OBV 指标的公式是：VA:=IF(CLOSE>REF(CLOSE,1),VOL,-VOL);OBV:SUM(IF(CLOSE=REF(CLOSE,1),0,VA),0);MAOBV:MA(OBV,M);你只要再加一个参数 M1 2 100 50 然后加入下式就可以了MAOBV2:MA(OBV,M1);以后只要在“调整指标参数”中调整到你认为适合的数值。由于 OBV 是通达信系统的指标，在下一次启动时会恢复原来的设置，因此你要另外设置一个指标来使用上述公式。
15. 求高手编写一个周k线macd在0轴以上金叉的通达信条件选股公式？
DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;
CROSS(DIF,DEA) AND DEA>0 AND DIF>0;
在选股周期中选周线。
16. 怎样通达信公式指标如何测试准确率？
首先登陆上咱们的通达信股票软件，然后点击左上角的功能——公式系统——公式管理器——点击或者新建需要测试的公式，设置检测条件，就可以开始检测了。
17. 通达信某均线穿某均线倍量阳指标源代码？
以下为通达信某均线穿某均线倍量阳指标的源代码：
```
输入：M1:SHORT,M2:SHORT,M3:SHORT,M4:SHORT,N1:SHORT,N2:SHORT,N3:SHORT,N4:SHORT,PERIOD:INTEGER;
VAR:MA1:DOUBLE,MA2:DOUBLE,MA3:DOUBLE,MA4:DOUBLE,LC:DOUBLE,TR:DOUBLE;
VAR:UPP:DOUBLE,LOW:DOUBLE,B1:DOUBLE,B2:DOUBLE,B3:DOUBLE,B4:DOUBLE,B5:DOUBLE,B6:DOUBLE,B7:DOUBLE,B8:DOUBLE,B9:DOUBLE,B10:DOUBLE,B11:DOUBLE,B12:DOUBLE,B13:DOUBLE,B14:DOUBLE,B15:DOUBLE,B16:DOUBLE,B17:DOUBLE,B18:DOUBLE,B19:DOUBLE,B20:DOUBLE,B21:DOUBLE,B22:DOUBLE,B23:DOUBLE,B24:DOUBLE,B25:DOUBLE,B26:DOUBLE,B27:DOUBLE,B28:DOUBLE,B29:DOUBLE,B30:DOUBLE,B31:DOUBLE,B32:DOUBLE,B33:DOUBLE,B34:DOUBLE,B35:DOUBLE,B36:DOUBLE,B37:DOUBLE,B38:DOUBLE,B39:DOUBLE,B40:DOUBLE,B41:DOUBLE,B42:DOUBLE,B43:DOUBLE,B44:DOUBLE,B45:DOUBLE,B46:DOUBLE,B47:DOUBLE,B48:DOUBLE;
VAR:BUY:INTEGER;
IF BARSCOUNT>PERIOD THEN BEGIN
MA1=MA(CLOSE,M1);
MA2=MA(CLOSE,M2);
MA3=MA(CLOSE,M3);
MA4=MA(CLOSE,M4);
UPP=MA1+N1*STDEV(CLOSE,M1);
LOW=MA1-N2*STDEV(CLOSE,M1);
B1=CLOSE<MA1 AND CROSS(MA2,MA1);
B2=CLOSE<MA1 AND MA1<=MA2 AND MA2<MA3 AND MA3<MA4;
B3=CLOSE<MA1 AND MA4<MA3 AND MA3<MA2 AND MA2<MA1;
B4=CLOSE<=MA2 AND MA2<MA1 AND MA1<=UPP AND
(CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4);
B5=CLOSE<=MA2 AND MA2<MA1 AND UPP<CLOSE;
B6=CLOSE>MA1 AND MA2>=MA1 AND BARSSINCE(B1)=1;
B7=CLOSE>MA1 AND MA2<MA1 AND BARSSINCE(B2)=1;
B8=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND BARSSINCE(B3)=1;
B9=CLOSE>MA1 AND MA1<=UPP AND MA2<MA1 AND (CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4) AND BARSSINCE(B4)=1;
B10=CLOSE>MA1 AND UPP<=MA1 AND BARSSINCE(B5)=1;
LC = Ref(CLOSE,-1);
TR = Max(Max(HIGH-LOW,ABS(HIGH-LC)),ABS(LC-LOW));
B11=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B6)>=PERIOD;
B12=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B7)>=PERIOD;
B13=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND
CLOSE-MA1>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B8)>=PERIOD;
IF B11 OR B12 OR B13 THEN
BEGIN
B14 = MA(CLOSE,N1) > MA(CLOSE,N2);
B15 = MA(CLOSE,N2) > MA(CLOSE,N3);
B16 = MA(CLOSE,N3) > MA(CLOSE,N4);
B17 = MA(CLOSE,N4) > MA(CLOSE,PERIOD);
B18 = VOLUME > MA(VOLUME,PERIOD)*N4;
B19 = CLOSE > MA(CLOSE,PERIOD);
B20 = IFF(B14 AND B15 AND B16 AND B17 AND B18 AND B19,1,0);
B21 = SUM(B20,PERIOD-1) = PERIOD-1;
B22 = REF(B21,1);
IF B21 THEN
BEGIN
IF B22 THEN BUY = 1;
END
ELSE BUY = 0;
END;
END;
BUY不为0时表示出现该指标的买入信号。
18. 通达信6个绝密公式源码？
TD1:=C;
TD2:=IF(TD1=1 AND REF(TD1,-1)=1 AND REF(TD1,-2)=1 AND REF(TD1,-3)=1 AND
REF(TD1,-4)=1 AND REF(TD1,-5)=1 AND REF(TD1,-6)=1 AND REF(TD1,-7)=1 AND
REF(TD1,-8)=1, 1,0);
TD3:=IF(REF(C,-9)>=REF(C,-13),1,0);
TD4:=IF(TD2=1 AND TD3=1,1,0);
TD5:=IF(H>=REF(LLV(L,5),-3),1,0);
D8:=IF(REF(TD4,1)=1 AND TD5=1,1,0);
19. obv默认指标公式？
OBV 是成交量指标 用成交量真实变化来推测股价运行的变化 它并不是超买超卖指标 所以设置0-100就忽略了他的根本意义 它的取值是根据成交量来的 你把几万的数值改成区间内变化的数值 这个指标将会毫无用处
Q2：哪种股票软件可以设置2条OBV平均线参数？
通达信 OBV 指标的公式是：VA:=IF(CLOSE>REF(CLOSE,1),VOL,-VOL);OBV:SUM(IF(CLOSE=REF(CLOSE,1),0,VA),0);MAOBV:MA(OBV,M);你只要再加一个参数 M1 2 100 50 然后加入下式就可以了MAOBV2:MA(OBV,M1);以后只要在“调整指标参数”中调整到你认为适合的数值。由于 OBV 是通达信系统的指标，在下一次启动时会恢复原来的设置，因此你要另外设置一个指标来使用上述公式。
20. 通达信某均线穿某均线倍量阳指标源代码？
以下为通达信某均线穿某均线倍量阳指标的源代码：
```
输入：M1:SHORT,M2:SHORT,M3:SHORT,M4:SHORT,N1:SHORT,N2:SHORT,N3:SHORT,N4:SHORT,PERIOD:INTEGER;
VAR:MA1:DOUBLE,MA2:DOUBLE,MA3:DOUBLE,MA4:DOUBLE,LC:DOUBLE,TR:DOUBLE;
VAR:UPP:DOUBLE,LOW:DOUBLE,B1:DOUBLE,B2:DOUBLE,B3:DOUBLE,B4:DOUBLE,B5:DOUBLE,B6:DOUBLE,B7:DOUBLE,B8:DOUBLE,B9:DOUBLE,B10:DOUBLE,B11:DOUBLE,B12:DOUBLE,B13:DOUBLE,B14:DOUBLE,B15:DOUBLE,B16:DOUBLE,B17:DOUBLE,B18:DOUBLE,B19:DOUBLE,B20:DOUBLE,B21:DOUBLE,B22:DOUBLE,B23:DOUBLE,B24:DOUBLE,B25:DOUBLE,B26:DOUBLE,B27:DOUBLE,B28:DOUBLE,B29:DOUBLE,B30:DOUBLE,B31:DOUBLE,B32:DOUBLE,B33:DOUBLE,B34:DOUBLE,B35:DOUBLE,B36:DOUBLE,B37:DOUBLE,B38:DOUBLE,B39:DOUBLE,B40:DOUBLE,B41:DOUBLE,B42:DOUBLE,B43:DOUBLE,B44:DOUBLE,B45:DOUBLE,B46:DOUBLE,B47:DOUBLE,B48:DOUBLE;
VAR:BUY:INTEGER;
IF BARSCOUNT>PERIOD THEN BEGIN
MA1=MA(CLOSE,M1);
MA2=MA(CLOSE,M2);
MA3=MA(CLOSE,M3);
MA4=MA(CLOSE,M4);
UPP=MA1+N1*STDEV(CLOSE,M1);
LOW=MA1-N2*STDEV(CLOSE,M1);
B1=CLOSE<MA1 AND CROSS(MA2,MA1);
B2=CLOSE<MA1 AND MA1<=MA2 AND MA2<MA3 AND MA3<MA4;
B3=CLOSE<MA1 AND MA4<MA3 AND MA3<MA2 AND MA2<MA1;
B4=CLOSE<=MA2 AND MA2<MA1 AND MA1<=UPP AND
(CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4);
B5=CLOSE<=MA2 AND MA2<MA1 AND UPP<CLOSE;
B6=CLOSE>MA1 AND MA2>=MA1 AND BARSSINCE(B1)=1;
B7=CLOSE>MA1 AND MA2<MA1 AND BARSSINCE(B2)=1;
B8=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND BARSSINCE(B3)=1;
B9=CLOSE>MA1 AND MA1<=UPP AND MA2<MA1 AND (CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4) AND BARSSINCE(B4)=1;
B10=CLOSE>MA1 AND UPP<=MA1 AND BARSSINCE(B5)=1;
LC = Ref(CLOSE,-1);
TR = Max(Max(HIGH-LOW,ABS(HIGH-LC)),ABS(LC-LOW));
B11=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B6)>=PERIOD;
B12=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B7)>=PERIOD;
B13=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND
CLOSE-MA1>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B8)>=PERIOD;
IF B11 OR B12 OR B13 THEN
BEGIN
B14 = MA(CLOSE,N1) > MA(CLOSE,N2);
B15 = MA(CLOSE,N2) > MA(CLOSE,N3);
B16 = MA(CLOSE,N3) > MA(CLOSE,N4);
B17 = MA(CLOSE,N4) > MA(CLOSE,PERIOD);
B18 = VOLUME > MA(VOLUME,PERIOD)*N4;
B19 = CLOSE > MA(CLOSE,PERIOD);
B20 = IFF(B14 AND B15 AND B16 AND B17 AND B18 AND B19,1,0);
B21 = SUM(B20,PERIOD-1) = PERIOD-1;
B22 = REF(B21,1);
IF B21 THEN
BEGIN
IF B22 THEN BUY = 1;
END
ELSE BUY = 0;
END;
END;
BUY不为0时表示出现该指标的买入信号。
21. 怎样通达信公式指标如何测试准确率？
首先登陆上咱们的通达信股票软件，然后点击左上角的功能——公式系统——公式管理器——点击或者新建需要测试的公式，设置检测条件，就可以开始检测了。
22. 通达信某均线穿某均线倍量阳指标源代码？
以下为通达信某均线穿某均线倍量阳指标的源代码：
```
输入：M1:SHORT,M2:SHORT,M3:SHORT,M4:SHORT,N1:SHORT,N2:SHORT,N3:SHORT,N4:SHORT,PERIOD:INTEGER;
VAR:MA1:DOUBLE,MA2:DOUBLE,MA3:DOUBLE,MA4:DOUBLE,LC:DOUBLE,TR:DOUBLE;
VAR:UPP:DOUBLE,LOW:DOUBLE,B1:DOUBLE,B2:DOUBLE,B3:DOUBLE,B4:DOUBLE,B5:DOUBLE,B6:DOUBLE,B7:DOUBLE,B8:DOUBLE,B9:DOUBLE,B10:DOUBLE,B11:DOUBLE,B12:DOUBLE,B13:DOUBLE,B14:DOUBLE,B15:DOUBLE,B16:DOUBLE,B17:DOUBLE,B18:DOUBLE,B19:DOUBLE,B20:DOUBLE,B21:DOUBLE,B22:DOUBLE,B23:DOUBLE,B24:DOUBLE,B25:DOUBLE,B26:DOUBLE,B27:DOUBLE,B28:DOUBLE,B29:DOUBLE,B30:DOUBLE,B31:DOUBLE,B32:DOUBLE,B33:DOUBLE,B34:DOUBLE,B35:DOUBLE,B36:DOUBLE,B37:DOUBLE,B38:DOUBLE,B39:DOUBLE,B40:DOUBLE,B41:DOUBLE,B42:DOUBLE,B43:DOUBLE,B44:DOUBLE,B45:DOUBLE,B46:DOUBLE,B47:DOUBLE,B48:DOUBLE;
VAR:BUY:INTEGER;
IF BARSCOUNT>PERIOD THEN BEGIN
MA1=MA(CLOSE,M1);
MA2=MA(CLOSE,M2);
MA3=MA(CLOSE,M3);
MA4=MA(CLOSE,M4);
UPP=MA1+N1*STDEV(CLOSE,M1);
LOW=MA1-N2*STDEV(CLOSE,M1);
B1=CLOSE<MA1 AND CROSS(MA2,MA1);
B2=CLOSE<MA1 AND MA1<=MA2 AND MA2<MA3 AND MA3<MA4;
B3=CLOSE<MA1 AND MA4<MA3 AND MA3<MA2 AND MA2<MA1;
B4=CLOSE<=MA2 AND MA2<MA1 AND MA1<=UPP AND
(CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4);
B5=CLOSE<=MA2 AND MA2<MA1 AND UPP<CLOSE;
B6=CLOSE>MA1 AND MA2>=MA1 AND BARSSINCE(B1)=1;
B7=CLOSE>MA1 AND MA2<MA1 AND BARSSINCE(B2)=1;
B8=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND BARSSINCE(B3)=1;
B9=CLOSE>MA1 AND MA1<=UPP AND MA2<MA1 AND (CLOSE-MA2)>N3*(MA2-MA3) AND (MA2-MA3)<N4*(MA3-MA4) AND BARSSINCE(B4)=1;
B10=CLOSE>MA1 AND UPP<=MA1 AND BARSSINCE(B5)=1;
LC = Ref(CLOSE,-1);
TR = Max(Max(HIGH-LOW,ABS(HIGH-LC)),ABS(LC-LOW));
B11=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B6)>=PERIOD;
B12=CLOSE>MA1 AND MA1>MA2 AND MA2>MA3 AND MA3>MA4 AND
CLOSE-MA4>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B7)>=PERIOD;
B13=CLOSE>MA1 AND MA3<MA2 AND MA2<MA1 AND
CLOSE-MA1>(N1+N2+N3+N4)/4*TR AND BARSSINCE(B8)>=PERIOD;
IF B11 OR B12 OR B13 THEN
BEGIN
B14 = MA(CLOSE,N1) > MA(CLOSE,N2);
B15 = MA(CLOSE,N2) > MA(CLOSE,N3);
B16 = MA(CLOSE,N3) > MA(CLOSE,N4);
B17 = MA(CLOSE,N4) > MA(CLOSE,PERIOD);
B18 = VOLUME > MA(VOLUME,PERIOD)*N4;
B19 = CLOSE > MA(CLOSE,PERIOD);
B20 = IFF(B14 AND B15 AND B16 AND B17 AND B18 AND B19,1,0);
B21 = SUM(B20,PERIOD-1) = PERIOD-1;
B22 = REF(B21,1);
IF B21 THEN
BEGIN
IF B22 THEN BUY = 1;
END
ELSE BUY = 0;
END;
END;
BUY不为0时表示出现该指标的买入信号。
23. obv默认指标公式？
OBV 是成交量指标 用成交量真实变化来推测股价运行的变化 它并不是超买超卖指标 所以设置0-100就忽略了他的根本意义 它的取值是根据成交量来的 你把几万的数值改成区间内变化的数值 这个指标将会毫无用处
Q2：哪种股票软件可以设置2条OBV平均线参数？
通达信 OBV 指标的公式是：VA:=IF(CLOSE>REF(CLOSE,1),VOL,-VOL);OBV:SUM(IF(CLOSE=REF(CLOSE,1),0,VA),0);MAOBV:MA(OBV,M);你只要再加一个参数 M1 2 100 50 然后加入下式就可以了MAOBV2:MA(OBV,M1);以后只要在“调整指标参数”中调整到你认为适合的数值。由于 OBV 是通达信系统的指标，在下一次启动时会恢复原来的设置，因此你要另外设置一个指标来使用上述公式。
24. 求高手编写一个周k线macd在0轴以上金叉的通达信条件选股公式？
DIF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;
CROSS(DIF,DEA) AND DEA>0 AND DIF>0;
在选股周期中选周线。
