通达信HD指标导入(dmi指标源码?)
1. dmi指标源码?
DMI指标又叫动向指标或趋向指标,其全称叫“Directional Movement Index,简称DMI”,也是由美国技术分析大师威尔斯·威尔德(Wells Wilder)所创造的,是一种中长期股市技术分析(Technical Analysis)方法。
DMI指标是通过分析股票价格在涨跌过程中买卖双方力量均衡点的变化情况,即多空双方的力量的变化受价格波动的影响而发生由均衡到失衡的循环过程,从而提供对趋势判断依据的一种技术指标。
dmi指标分类:DMI指标共有+DI(即PDI,下同)、-DI(即MDI,下同)、ADX、ADXR四条线,也是它的四个参数值,它分为多空指标(+DI、-DI)和趋向指标(ADX、ADXR)两组指标。
dmi指标公式源码
TR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-ref(CLOSE,1))),ABS(ref(CLOSE,1)-LOW)),N);
HD:=HIGH-ref(HIGH,1);
LD:=ref(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD0&&HDLD,HD,0),N);
DMM:=EXPMEMA(IF(LD0&&LDHD,LD,0),N);
PDI:=DMP*100/TR,COLORFFFFFF;
DRAWTEXT_FIX(CO,0.01,0.9,0''),COLORRED;
DRAWTEXT_FIX(CO,1,1,0,''),COLORRED;
MDI:=DMM*100/TR,COLOR00FFFF;
ADX:=EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,M),COLOR0000FF,LINETHICK2;
ADXR:=EXPMEMA(ADX,M),COLOR00FF00,LINETHICK2;
DYNAINFO(9)0 AND CROSS(ADX,MDI) AND CROSS(ADXR,MDI) AND PDIMDI;
2. 通达信pdi是什么参数?
MTR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(REF(CLOSE,1)-LOW)),14);
HD :=HIGH-REF(HIGH,1);
LD :=REF(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD>0&&HD>LD,HD,0),14);
DMM:=EXPMEMA(IF(LD>0&&LD>HD,LD,0),14);
PDI: DMP*100/MTR,COLORRED;
MDI: DMM*100/MTR,COLORGREEN;
DRAWBAND(PDI,RGB(255,0,0),MDI,RGB(0,55,250));
ADX:= EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,6);
ADXR:=EXPMEMA(ADX,6);
STICKLINE(PDI,PDI,0,0.00001,0),COLORRED;
20,DOTLINE;
40,DOTLINE;
{IF(PDI<REF(PDI,1),PDI,DRAWNULL),COLORCYAN;}
STICKLINE(CROSS(20,PDI),PDI,0,0.0001,0),COLORGREEN;
STICKLINE(CROSS(PDI,20),0,PDI,0.0001,0),COLORYELLOW;
上穿: CROSS(PDI,MDI),COLORRED,NODRAW;
下穿: CROSS(MDI,PDI),COLORCYAN,NODRAW;
DRAWICON(上穿,PDI,25);
DRAWICON(下穿,PDI,24);
顶: PDI>40,COLORWHITE,NODRAW;
底: MDI>40,COLORCYAN,NODRAW;
STICKLINE(PDI>40,40,PDI,1,0),COLORWHITE;
STICKLINE(MDI>40,0,PDI,1,0),COLORCYAN;
3. 成交量压力线突破指标公式?
这是一个经典支撑和压力指标,通达信都有系统公式
但我想增加一条下降压力线,也就是说压力线只选择向下,那位高手指点一下
N:=时间跨度; {支压线设定长度,不同长度支压不同,这个参数要和搜股器一致}
A1:=REF(H,N)=HHV(H,2*N+1);
B1:=FILTER(A1,N);
C1:=BACKSET(B1,N+1);
D1:=FILTER(C1,N);{高点}
A2:=REF(L,N)=LLV(L,2*N+1);
B2:=FILTER(A2,N);
C2:=BACKSET(B2,N+1);
D2:=FILTER(C2,N);{低点}
E1:=(REF(LLV(L,2*N),1)+REF(HHV(H,2*N),1))/2; E2:=(H+L)/2;{高低点出现在同一K线上时可作取舍}
H1:=(D1 AND NOT(D2 AND E1>=E2)) OR BARSTATUS=2 OR BARSCOUNT(C)=1;
L1:=(D2 AND NOT(D1 AND E1<E2)); H2:=D1 AND NOT(D2 AND E1>=E2);
X1:=REF(BARSLAST(H1),1)+1; F1:=BACKSET(H1 AND COUNT(L1,X1)>0,LLVBARS(IF(L1,L,10000),X1));
G1:=F1>REF(F1,1); I1:=BACKSET(G1,2); LD:=I1>REF(I1,1);{过滤后低点}
L2:=LD OR BARSTATUS=2 OR BARSCOUNT(C)=1;
X2:=REF(BARSLAST(L2),1)+1; F2:=BACKSET(L2 AND COUNT(H2,X2)>0,HHVBARS(IF(H2,H,0),X2));
G2:=F2>REF(F2,1); I2:=BACKSET(G2,2); HD:=I2>REF(I2,1);{过滤后高点}
R1:=BACKSET(BARSTATUS=2,BARSLAST(HD)+1);
S1:=R1>REF(R1,1); {前一高}
T1:=BACKSET(BARSTATUS=2,BARSLAST(LD)+1);
U1:=T1>REF(T1,1); {前一低}
R2:=BACKSET(S1,REF(BARSLAST(HD),1)+2);
S2:=R
4. dmi指标源码?
DMI指标又叫动向指标或趋向指标,其全称叫“Directional Movement Index,简称DMI”,也是由美国技术分析大师威尔斯·威尔德(Wells Wilder)所创造的,是一种中长期股市技术分析(Technical Analysis)方法。
DMI指标是通过分析股票价格在涨跌过程中买卖双方力量均衡点的变化情况,即多空双方的力量的变化受价格波动的影响而发生由均衡到失衡的循环过程,从而提供对趋势判断依据的一种技术指标。
dmi指标分类:DMI指标共有+DI(即PDI,下同)、-DI(即MDI,下同)、ADX、ADXR四条线,也是它的四个参数值,它分为多空指标(+DI、-DI)和趋向指标(ADX、ADXR)两组指标。
dmi指标公式源码
TR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-ref(CLOSE,1))),ABS(ref(CLOSE,1)-LOW)),N);
HD:=HIGH-ref(HIGH,1);
LD:=ref(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD0&&HDLD,HD,0),N);
DMM:=EXPMEMA(IF(LD0&&LDHD,LD,0),N);
PDI:=DMP*100/TR,COLORFFFFFF;
DRAWTEXT_FIX(CO,0.01,0.9,0''),COLORRED;
DRAWTEXT_FIX(CO,1,1,0,''),COLORRED;
MDI:=DMM*100/TR,COLOR00FFFF;
ADX:=EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,M),COLOR0000FF,LINETHICK2;
ADXR:=EXPMEMA(ADX,M),COLOR00FF00,LINETHICK2;
DYNAINFO(9)0 AND CROSS(ADX,MDI) AND CROSS(ADXR,MDI) AND PDIMDI;
5. 成交量压力线突破指标公式?
这是一个经典支撑和压力指标,通达信都有系统公式
但我想增加一条下降压力线,也就是说压力线只选择向下,那位高手指点一下
N:=时间跨度; {支压线设定长度,不同长度支压不同,这个参数要和搜股器一致}
A1:=REF(H,N)=HHV(H,2*N+1);
B1:=FILTER(A1,N);
C1:=BACKSET(B1,N+1);
D1:=FILTER(C1,N);{高点}
A2:=REF(L,N)=LLV(L,2*N+1);
B2:=FILTER(A2,N);
C2:=BACKSET(B2,N+1);
D2:=FILTER(C2,N);{低点}
E1:=(REF(LLV(L,2*N),1)+REF(HHV(H,2*N),1))/2; E2:=(H+L)/2;{高低点出现在同一K线上时可作取舍}
H1:=(D1 AND NOT(D2 AND E1>=E2)) OR BARSTATUS=2 OR BARSCOUNT(C)=1;
L1:=(D2 AND NOT(D1 AND E1<E2)); H2:=D1 AND NOT(D2 AND E1>=E2);
X1:=REF(BARSLAST(H1),1)+1; F1:=BACKSET(H1 AND COUNT(L1,X1)>0,LLVBARS(IF(L1,L,10000),X1));
G1:=F1>REF(F1,1); I1:=BACKSET(G1,2); LD:=I1>REF(I1,1);{过滤后低点}
L2:=LD OR BARSTATUS=2 OR BARSCOUNT(C)=1;
X2:=REF(BARSLAST(L2),1)+1; F2:=BACKSET(L2 AND COUNT(H2,X2)>0,HHVBARS(IF(H2,H,0),X2));
G2:=F2>REF(F2,1); I2:=BACKSET(G2,2); HD:=I2>REF(I2,1);{过滤后高点}
R1:=BACKSET(BARSTATUS=2,BARSLAST(HD)+1);
S1:=R1>REF(R1,1); {前一高}
T1:=BACKSET(BARSTATUS=2,BARSLAST(LD)+1);
U1:=T1>REF(T1,1); {前一低}
R2:=BACKSET(S1,REF(BARSLAST(HD),1)+2);
S2:=R
6. 通达信pdi是什么参数?
MTR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(REF(CLOSE,1)-LOW)),14);
HD :=HIGH-REF(HIGH,1);
LD :=REF(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD>0&&HD>LD,HD,0),14);
DMM:=EXPMEMA(IF(LD>0&&LD>HD,LD,0),14);
PDI: DMP*100/MTR,COLORRED;
MDI: DMM*100/MTR,COLORGREEN;
DRAWBAND(PDI,RGB(255,0,0),MDI,RGB(0,55,250));
ADX:= EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,6);
ADXR:=EXPMEMA(ADX,6);
STICKLINE(PDI,PDI,0,0.00001,0),COLORRED;
20,DOTLINE;
40,DOTLINE;
{IF(PDI<REF(PDI,1),PDI,DRAWNULL),COLORCYAN;}
STICKLINE(CROSS(20,PDI),PDI,0,0.0001,0),COLORGREEN;
STICKLINE(CROSS(PDI,20),0,PDI,0.0001,0),COLORYELLOW;
上穿: CROSS(PDI,MDI),COLORRED,NODRAW;
下穿: CROSS(MDI,PDI),COLORCYAN,NODRAW;
DRAWICON(上穿,PDI,25);
DRAWICON(下穿,PDI,24);
顶: PDI>40,COLORWHITE,NODRAW;
底: MDI>40,COLORCYAN,NODRAW;
STICKLINE(PDI>40,40,PDI,1,0),COLORWHITE;
STICKLINE(MDI>40,0,PDI,1,0),COLORCYAN;
7. dmi指标源码?
DMI指标又叫动向指标或趋向指标,其全称叫“Directional Movement Index,简称DMI”,也是由美国技术分析大师威尔斯·威尔德(Wells Wilder)所创造的,是一种中长期股市技术分析(Technical Analysis)方法。
DMI指标是通过分析股票价格在涨跌过程中买卖双方力量均衡点的变化情况,即多空双方的力量的变化受价格波动的影响而发生由均衡到失衡的循环过程,从而提供对趋势判断依据的一种技术指标。
dmi指标分类:DMI指标共有+DI(即PDI,下同)、-DI(即MDI,下同)、ADX、ADXR四条线,也是它的四个参数值,它分为多空指标(+DI、-DI)和趋向指标(ADX、ADXR)两组指标。
dmi指标公式源码
TR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-ref(CLOSE,1))),ABS(ref(CLOSE,1)-LOW)),N);
HD:=HIGH-ref(HIGH,1);
LD:=ref(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD0&&HDLD,HD,0),N);
DMM:=EXPMEMA(IF(LD0&&LDHD,LD,0),N);
PDI:=DMP*100/TR,COLORFFFFFF;
DRAWTEXT_FIX(CO,0.01,0.9,0''),COLORRED;
DRAWTEXT_FIX(CO,1,1,0,''),COLORRED;
MDI:=DMM*100/TR,COLOR00FFFF;
ADX:=EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,M),COLOR0000FF,LINETHICK2;
ADXR:=EXPMEMA(ADX,M),COLOR00FF00,LINETHICK2;
DYNAINFO(9)0 AND CROSS(ADX,MDI) AND CROSS(ADXR,MDI) AND PDIMDI;
8. 成交量压力线突破指标公式?
这是一个经典支撑和压力指标,通达信都有系统公式
但我想增加一条下降压力线,也就是说压力线只选择向下,那位高手指点一下
N:=时间跨度; {支压线设定长度,不同长度支压不同,这个参数要和搜股器一致}
A1:=REF(H,N)=HHV(H,2*N+1);
B1:=FILTER(A1,N);
C1:=BACKSET(B1,N+1);
D1:=FILTER(C1,N);{高点}
A2:=REF(L,N)=LLV(L,2*N+1);
B2:=FILTER(A2,N);
C2:=BACKSET(B2,N+1);
D2:=FILTER(C2,N);{低点}
E1:=(REF(LLV(L,2*N),1)+REF(HHV(H,2*N),1))/2; E2:=(H+L)/2;{高低点出现在同一K线上时可作取舍}
H1:=(D1 AND NOT(D2 AND E1>=E2)) OR BARSTATUS=2 OR BARSCOUNT(C)=1;
L1:=(D2 AND NOT(D1 AND E1<E2)); H2:=D1 AND NOT(D2 AND E1>=E2);
X1:=REF(BARSLAST(H1),1)+1; F1:=BACKSET(H1 AND COUNT(L1,X1)>0,LLVBARS(IF(L1,L,10000),X1));
G1:=F1>REF(F1,1); I1:=BACKSET(G1,2); LD:=I1>REF(I1,1);{过滤后低点}
L2:=LD OR BARSTATUS=2 OR BARSCOUNT(C)=1;
X2:=REF(BARSLAST(L2),1)+1; F2:=BACKSET(L2 AND COUNT(H2,X2)>0,HHVBARS(IF(H2,H,0),X2));
G2:=F2>REF(F2,1); I2:=BACKSET(G2,2); HD:=I2>REF(I2,1);{过滤后高点}
R1:=BACKSET(BARSTATUS=2,BARSLAST(HD)+1);
S1:=R1>REF(R1,1); {前一高}
T1:=BACKSET(BARSTATUS=2,BARSLAST(LD)+1);
U1:=T1>REF(T1,1); {前一低}
R2:=BACKSET(S1,REF(BARSLAST(HD),1)+2);
S2:=R
9. 通达信pdi是什么参数?
MTR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(REF(CLOSE,1)-LOW)),14);
HD :=HIGH-REF(HIGH,1);
LD :=REF(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD>0&&HD>LD,HD,0),14);
DMM:=EXPMEMA(IF(LD>0&&LD>HD,LD,0),14);
PDI: DMP*100/MTR,COLORRED;
MDI: DMM*100/MTR,COLORGREEN;
DRAWBAND(PDI,RGB(255,0,0),MDI,RGB(0,55,250));
ADX:= EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,6);
ADXR:=EXPMEMA(ADX,6);
STICKLINE(PDI,PDI,0,0.00001,0),COLORRED;
20,DOTLINE;
40,DOTLINE;
{IF(PDI<REF(PDI,1),PDI,DRAWNULL),COLORCYAN;}
STICKLINE(CROSS(20,PDI),PDI,0,0.0001,0),COLORGREEN;
STICKLINE(CROSS(PDI,20),0,PDI,0.0001,0),COLORYELLOW;
上穿: CROSS(PDI,MDI),COLORRED,NODRAW;
下穿: CROSS(MDI,PDI),COLORCYAN,NODRAW;
DRAWICON(上穿,PDI,25);
DRAWICON(下穿,PDI,24);
顶: PDI>40,COLORWHITE,NODRAW;
底: MDI>40,COLORCYAN,NODRAW;
STICKLINE(PDI>40,40,PDI,1,0),COLORWHITE;
STICKLINE(MDI>40,0,PDI,1,0),COLORCYAN;
10. 通达信pdi是什么参数?
MTR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(REF(CLOSE,1)-LOW)),14);
HD :=HIGH-REF(HIGH,1);
LD :=REF(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD>0&&HD>LD,HD,0),14);
DMM:=EXPMEMA(IF(LD>0&&LD>HD,LD,0),14);
PDI: DMP*100/MTR,COLORRED;
MDI: DMM*100/MTR,COLORGREEN;
DRAWBAND(PDI,RGB(255,0,0),MDI,RGB(0,55,250));
ADX:= EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,6);
ADXR:=EXPMEMA(ADX,6);
STICKLINE(PDI,PDI,0,0.00001,0),COLORRED;
20,DOTLINE;
40,DOTLINE;
{IF(PDI<REF(PDI,1),PDI,DRAWNULL),COLORCYAN;}
STICKLINE(CROSS(20,PDI),PDI,0,0.0001,0),COLORGREEN;
STICKLINE(CROSS(PDI,20),0,PDI,0.0001,0),COLORYELLOW;
上穿: CROSS(PDI,MDI),COLORRED,NODRAW;
下穿: CROSS(MDI,PDI),COLORCYAN,NODRAW;
DRAWICON(上穿,PDI,25);
DRAWICON(下穿,PDI,24);
顶: PDI>40,COLORWHITE,NODRAW;
底: MDI>40,COLORCYAN,NODRAW;
STICKLINE(PDI>40,40,PDI,1,0),COLORWHITE;
STICKLINE(MDI>40,0,PDI,1,0),COLORCYAN;
11. 成交量压力线突破指标公式?
这是一个经典支撑和压力指标,通达信都有系统公式
但我想增加一条下降压力线,也就是说压力线只选择向下,那位高手指点一下
N:=时间跨度; {支压线设定长度,不同长度支压不同,这个参数要和搜股器一致}
A1:=REF(H,N)=HHV(H,2*N+1);
B1:=FILTER(A1,N);
C1:=BACKSET(B1,N+1);
D1:=FILTER(C1,N);{高点}
A2:=REF(L,N)=LLV(L,2*N+1);
B2:=FILTER(A2,N);
C2:=BACKSET(B2,N+1);
D2:=FILTER(C2,N);{低点}
E1:=(REF(LLV(L,2*N),1)+REF(HHV(H,2*N),1))/2; E2:=(H+L)/2;{高低点出现在同一K线上时可作取舍}
H1:=(D1 AND NOT(D2 AND E1>=E2)) OR BARSTATUS=2 OR BARSCOUNT(C)=1;
L1:=(D2 AND NOT(D1 AND E1<E2)); H2:=D1 AND NOT(D2 AND E1>=E2);
X1:=REF(BARSLAST(H1),1)+1; F1:=BACKSET(H1 AND COUNT(L1,X1)>0,LLVBARS(IF(L1,L,10000),X1));
G1:=F1>REF(F1,1); I1:=BACKSET(G1,2); LD:=I1>REF(I1,1);{过滤后低点}
L2:=LD OR BARSTATUS=2 OR BARSCOUNT(C)=1;
X2:=REF(BARSLAST(L2),1)+1; F2:=BACKSET(L2 AND COUNT(H2,X2)>0,HHVBARS(IF(H2,H,0),X2));
G2:=F2>REF(F2,1); I2:=BACKSET(G2,2); HD:=I2>REF(I2,1);{过滤后高点}
R1:=BACKSET(BARSTATUS=2,BARSLAST(HD)+1);
S1:=R1>REF(R1,1); {前一高}
T1:=BACKSET(BARSTATUS=2,BARSLAST(LD)+1);
U1:=T1>REF(T1,1); {前一低}
R2:=BACKSET(S1,REF(BARSLAST(HD),1)+2);
S2:=R
12. 高手改个DMI公式?
通达信的:N:=14;M:=6;MTR:= SUM(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(LOW-REF(CLOSE,1))),N)
;HD := HIGH-REF(HIGH,1)
;LD := REF(LOW,1)-LOW;DMP:= SUM(IF(HD>0 AND HD>LD,HD,0),N)
;DMM:= SUM(IF(LD>0 AND LD>HD,LD,0),N)
;PDI:=DMP*100/MTR;MDI:=DMM*100/MTR;ADX:=MA(ABS(MDI-PDI)/(MDI+PDI)*100,M)
;ADXR:=(ADX+REF(ADX,M))/2;XG:PDI>ADX AND PDI>ADXR AND PDI>30 AND PDI>REF(PDI,1) AND MDI<15 AND MDI<REF(MDI,1) AND MDI<ADX AND MDI<ADXR AND CROSS(ADX,ADXR); 测试通过!提示:不能用通达信自带的DMI指标进行验证!希望能够帮助你!
13. 高手改个DMI公式?
通达信的:N:=14;M:=6;MTR:= SUM(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(LOW-REF(CLOSE,1))),N)
;HD := HIGH-REF(HIGH,1)
;LD := REF(LOW,1)-LOW;DMP:= SUM(IF(HD>0 AND HD>LD,HD,0),N)
;DMM:= SUM(IF(LD>0 AND LD>HD,LD,0),N)
;PDI:=DMP*100/MTR;MDI:=DMM*100/MTR;ADX:=MA(ABS(MDI-PDI)/(MDI+PDI)*100,M)
;ADXR:=(ADX+REF(ADX,M))/2;XG:PDI>ADX AND PDI>ADXR AND PDI>30 AND PDI>REF(PDI,1) AND MDI<15 AND MDI<REF(MDI,1) AND MDI<ADX AND MDI<ADXR AND CROSS(ADX,ADXR); 测试通过!提示:不能用通达信自带的DMI指标进行验证!希望能够帮助你!
14. dmi指标源码?
DMI指标又叫动向指标或趋向指标,其全称叫“Directional Movement Index,简称DMI”,也是由美国技术分析大师威尔斯·威尔德(Wells Wilder)所创造的,是一种中长期股市技术分析(Technical Analysis)方法。
DMI指标是通过分析股票价格在涨跌过程中买卖双方力量均衡点的变化情况,即多空双方的力量的变化受价格波动的影响而发生由均衡到失衡的循环过程,从而提供对趋势判断依据的一种技术指标。
dmi指标分类:DMI指标共有+DI(即PDI,下同)、-DI(即MDI,下同)、ADX、ADXR四条线,也是它的四个参数值,它分为多空指标(+DI、-DI)和趋向指标(ADX、ADXR)两组指标。
dmi指标公式源码
TR:=EXPMEMA(MAX(MAX(HIGH-LOW,ABS(HIGH-ref(CLOSE,1))),ABS(ref(CLOSE,1)-LOW)),N);
HD:=HIGH-ref(HIGH,1);
LD:=ref(LOW,1)-LOW;
DMP:=EXPMEMA(IF(HD0&&HDLD,HD,0),N);
DMM:=EXPMEMA(IF(LD0&&LDHD,LD,0),N);
PDI:=DMP*100/TR,COLORFFFFFF;
DRAWTEXT_FIX(CO,0.01,0.9,0''),COLORRED;
DRAWTEXT_FIX(CO,1,1,0,''),COLORRED;
MDI:=DMM*100/TR,COLOR00FFFF;
ADX:=EXPMEMA(ABS(MDI-PDI)/(MDI+PDI)*100,M),COLOR0000FF,LINETHICK2;
ADXR:=EXPMEMA(ADX,M),COLOR00FF00,LINETHICK2;
DYNAINFO(9)0 AND CROSS(ADX,MDI) AND CROSS(ADXR,MDI) AND PDIMDI;
15. 高手改个DMI公式?
通达信的:N:=14;M:=6;MTR:= SUM(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(LOW-REF(CLOSE,1))),N)
;HD := HIGH-REF(HIGH,1)
;LD := REF(LOW,1)-LOW;DMP:= SUM(IF(HD>0 AND HD>LD,HD,0),N)
;DMM:= SUM(IF(LD>0 AND LD>HD,LD,0),N)
;PDI:=DMP*100/MTR;MDI:=DMM*100/MTR;ADX:=MA(ABS(MDI-PDI)/(MDI+PDI)*100,M)
;ADXR:=(ADX+REF(ADX,M))/2;XG:PDI>ADX AND PDI>ADXR AND PDI>30 AND PDI>REF(PDI,1) AND MDI<15 AND MDI<REF(MDI,1) AND MDI<ADX AND MDI<ADXR AND CROSS(ADX,ADXR); 测试通过!提示:不能用通达信自带的DMI指标进行验证!希望能够帮助你!
16. 高手改个DMI公式?
通达信的:N:=14;M:=6;MTR:= SUM(MAX(MAX(HIGH-LOW,ABS(HIGH-REF(CLOSE,1))),ABS(LOW-REF(CLOSE,1))),N)
;HD := HIGH-REF(HIGH,1)
;LD := REF(LOW,1)-LOW;DMP:= SUM(IF(HD>0 AND HD>LD,HD,0),N)
;DMM:= SUM(IF(LD>0 AND LD>HD,LD,0),N)
;PDI:=DMP*100/MTR;MDI:=DMM*100/MTR;ADX:=MA(ABS(MDI-PDI)/(MDI+PDI)*100,M)
;ADXR:=(ADX+REF(ADX,M))/2;XG:PDI>ADX AND PDI>ADXR AND PDI>30 AND PDI>REF(PDI,1) AND MDI<15 AND MDI<REF(MDI,1) AND MDI<ADX AND MDI<ADXR AND CROSS(ADX,ADXR); 测试通过!提示:不能用通达信自带的DMI指标进行验证!希望能够帮助你!